The 123.hp com/oj6800 print-head issue usually executes due to excessive ink leakage where the bottom of the printer right under where your print head is fixed could also be full of ink leakage. It can further cause dribbling issues. Well for this technical problem, a well-explained solution has been penned down by a team of HP Printer Support expert technicians to explain steps for troubleshooting Print Head issue 123.hp com/ojpro6800 on the go.
Steps to repair 123.hp com/oj6800 Printhead issue – HP Printer Repair Service
Step 1: Changing the ink cartridge
- Open the 123 hp com /office jet pro 6800 cover first to vary ink cartridges.
- Next, simply disconnect the facility cord
Step 2: Removing tall screws
- Remove all the screws that are located inside the inner top cover of your printer. Users here are going to need either a star screwdriver of the proper size or could also be of a flathead screwdriver that can exactly fit all other screws.
- Next, users are advised to softly take off the inner top cover by putting it out where one doesn't get to disconnect all the cables. Simply place it on the opposite side to urge simple access to the printer’s internals section.
Step 3: Handling the plastic location
- Make a correct note of the plastic location tape’s orientation section to simply put this at the straight back side precisely the way it came first. Take care that its end section is either towards the left or right side
- Remove the tape in the next tape now.
Step 4: Managing the print-head base
- Remove all the screws immediately from the print head’s base to proceed further
- Carefully attempt to lift this whole assembly with the print head also as its bar and tilt it the wrong way up. make certain to not disconnect any of the cables.
Step 5: pack up the print head
- Clean up carefully the rock bottom of the 123.hp.com/officejet pro 6800 all in one printer print head section with a lint-free wipe method.
- Next, simply put everything in its original place and therefore the reverse all of your above instructions described.
- Plug in the facility again.
- Turn it on next.
- Get access to the printer’s instrument panel, swipe left then attend the “Setup / Printer Maintenance” and choose the “Clean Print head” icon carefully.
- Clean all print heads eventually.
Connect on HP Printer support and obtain 1-800-673-8163
Get in-tuned with expert printer technicians at HP Printer Customer Support department to resolve Print Head issue 123.hp com/setup officejet pro 6800 issues at much faster rates. We are available all day long to assist resolve your HP printer issues on a prompt basis.
Tags
123.hp com/ojpro6800
123.hp com/setup officejet pro 6800
123 hp com /office jet pro 6800
123.hp.com/oj6800
123.hp.com/officejet pro 6800 all in one printer
www.123.hp.com
