Sometimes, a hard drive on your device can cause problems with your hp pavilion support number. This may cause the device to run slightly slower than normal. Therefore, a user should remove or disassemble the hard drive and then reassemble it. Doing this can solve the problem and your laptop support number for hp can function as usual.
In this article, you will learn the basic method to replace hp support phone number +1-800-673-8163, HP Pavilion 15, and HP Pavilion x360 hard drive. You can also do this process on other models of HP laptops such as HP Pavilion Desktop, HP Pavilion DV6, hp pavilion tech support phone number and HP Pavilion Gaming Laptops. To perform this process, you will need a head screwdriver with an opening tool made of plastic. This will help you open the keyboard.
How to disassemble HP Pavilion?
Follow the steps given below in an orderly manner so that you can remove the hard drive without facing any issues.
Turn off your laptop and turn it on in such a way that its bottom is facing upwards.
Slide the bar to the right with the lock icon. You can find it in the upper left hand corner.
This will unlock the battery and you can slide forward to the left with the battery icon. You can find this strip on the right side of the laptop.
Now, you have to hold the battery and finish it fast.
Also, start to remove the 6.5 mm screw (20 in number) using a screwdriver.
If any of these screws are covered with silver stickers, you can gently scrape the stickers to take out the screw.
Continually, you have to cover the black corner on either side of the battery.
Here, you will see four additional holes, which you need to remove one by one.
Also, remove the CD-ROM by pressing the small button above it.
Later, you have to open the laptop as well as open the laptop.
Now gently open the keyboard with the help of a plastic opening tool.
This will allow you to easily access the hard drive that usually exists on the right side of the RAM and above the motherboard.
Again use a plastic tool to separate the plate from the face and proceed to the last step.
Finally, disconnect the cable by pulling out its base but not the ribbon.
Hp pavilion laptop enables method
Once you disassemble the hp laptop support number by removing all of its components, you can be assured to check if your laptop has started functioning normally at a good speed. To reassemble it, you have to follow the procedure in a reverse manner. You can use contact hp customer support to get rid of some minor problems with call hp support for desktop devices.
For more help:
If you are not able to follow the procedure given in this article, then you can seek expert help from hp laptop support number+1-800-673-8163 team. Visit more information- https://www.techelp.info/
Tags-
hp pavilion tech support phone number,
hp laptop technical support number,
hp desktop support phone number,
desktop support number for hp,
